![]() Now that everything was set up, it was time to decide how to generate the CVs that I would send to the MiniMod synth. I then decided that inputs 1 and 2, and outputs 7 and 8, would carry audio, and configured them in the Audio Devices page of OS X’s Audio MIDI Setup utility. ![]() Once mounted, I connected the ES-8’s USB socket to my MacBook Pro, and patched analogue outputs 1, 2 and 3 (which I had decided would carry CVs) to the appropriate CV inputs on the oscillator and filter modules, and outputs 4 and 5 to the Gate inputs on the dual contour generator module. The ES-8’s power connecter conforms to the Doepfer standard used by AJH Synth, so that was no problem either. This proved to be straightforward because the mounting holes on the ES-8 are slots, which makes them compatible with both the Doepfer and Analogue Systems mounting standards. To do so, I mounted the ES-8 in an AJH Synth MiniMod case in place of VCO3. I’m not a fan of ADAT interfaces and would never encourage one within my studio, so I decided to concentrate on the analogue ins and outs, all of which are 3.5mm TS sockets, and thus ideal for patching to the other modules residing in my (and your) Eurorack cases. If this all sounds a bit esoteric, I’m not surprised these are products designed for people who enjoy making pieces of equipment talk to one another even though nature had decreed that they should forever be strangers. (PC support is not currently available, but is apparently on its way.) Behind the scenes, it also offers headers for an ES-5 Expander, which has further expansion sockets for yet more Expert Sleepers modules, and an ES-6 CV/Lightpipe Interface which, again, can be further expanded with additional modules. It provides four analogue inputs, eight ☑0V analogue outputs, an eight-in/eight-out ADAT interface, and a USB type B socket for talking to the Mac or iOS device itself. It sounds like a tall order, but the ES-8 is one of a new generation of Eurorack interfaces that allows you to do this. But today you want to use a single cable to transmit and receive any analogue signals - audio, CVs and timing signals - without differentiating between them, and without any external boxes in the way. More recently, you might also have added a CV/MIDI converter to go in the other direction. In years past, you would have required a computer/MIDI interface followed by a 5-pin MIDI/CV converter of some description. The ES-8 has a high quality internal clock, and it can optionally sync to the clock from the input ADAT signal.Imagine that you’re using a computer-based DAW alongside a modular analogue synth and that you want them to talk to each other. Without a USB connection, the ES-8 can be used as a standalone ADAT-to-audio converter, providing DC-coupled I/O expansion for another ADAT-equipped audio interface.Īn expansion header allows connection of an Expert Sleepers ES-5, to which in turn you can connect Expert Sleepers gate, CV and MIDI expanders. This could be used for example to expand the I/O count via an Expert Sleepers ES-3 and/or ES-6, or to connect a traditional audio interface to add, say, mic preamps or 1/4" line outputs (for example with the Behringer ADA8200). Silent Way, Max/MSP, Reaktor, CV Toolkit, zMors, Audulus, Bitwig Studio, etc.) as well as audio and CV processing iOS apps. As such it is directly compatible with all popular computer-based CV generation software (e.g. The ES-8 is a USB 2.0 class-compliant audio interface in a Eurorack module, with DC-coupled inputs and outputs that can be used for both CVs and audio.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |